The automatic closing function, which automatically finishes measurement when the trace point is returned to the starting point, makes measurement easier.
The PLANIX EX and EX-L are not only equipped with metric units (mm, cm, m, and km) but also provide the user with such units as in., ft., yd., mi., and acres, as well as other user-defined units.
With the Point mode, the user can more easily and more quickly obtain areas and lengths of diagrams with straight lines. The Stream mode should be used for tracing curves on curved lines.
Please refer to the brochure for additional information.
| Functions | PLANIX EX | PLANIX EX-L |
| X, Y coordinate | Yes | Yes |
| Side length | Yes | Yes |
| Line | Yes | Yes |
| Area | Yes | Yes |
| Center point | Yes | Yes |
| Radius | Yes | Yes |
| Triangle | Yes | Yes |
| Angle | Yes | Yes |
| RS232C cable | Yes(Option) | Yes(Option) |
| Printer | Yes(Option) | Yes(Option) |
| RS-232C interface Cable |
The RS-232C interface cable connects PLANIX EX or PLANIX EX-L to the computer. Any measurement value can be sent from the PLANIX to the computer through this cable. It comes with a free data-collecting software. |
| Thermal Printer | There is an optional thermal printer for an immediate hardcopy record of your measurements. |
| Power | Internal NiCd or AC adaptor | |
| Operating time | 40 hours after 15 hours recharge | |
| Display | LCD, 17 digits on 3 lines | |
| Measuring range | EX | 380 mm x 10 m (14 in. x 32.5 ft.) |
| EX-L | 450 mm x 10 m (17 in. x 32.5 ft.) | |
| Accuracy | +/- 0.1% (for an area of 100 x 100mmt) | |
| Minimum line reading | 0.05 mm | |
| Dimensions | EX | 350 x 43 x 165 mm |
| EX-L | 400 x 43 x 165 mm | |
| Carrying case | EX | 365 x 65 x 195 mm |
| EX-L | 465 x 70 x 245 mm | |
| Weight | EX | Approx. 1 kg. |
| EX-L | Approx. 1.4 kg. | |
△=Option |
PLANIX EX |
PLANIX EX-L
|
||||
| X, Y coordinates | * | * | * | * | ○ | ○ |
| External outputs | * | * | * | * | ○ | ○ |
| Area | ○ | ○ | ○ | ○ | ○ | ○ |
| Side length | * | * | * | ○ | ○ | ○ |
| Line length | * | * | * | ○ | ○ | ○ |
| Radius | * | * | * | * | ○ | ○ |
| Center point | * | * | * | * | ○ | ○ |
| Triangle (base length, height and area) | * | * | * | * | ○ | ○ |
| Angle (side length and angle) | * | * | * | * | ○ | ○ |
| Scale: key input | * | * | ○ | ○ | ○ | ○ |
| Scale: PLOT-real measurement correction | * | * | * | ○ | ○ | ○ |
| Measuring area for differing scale of X, Y | * | * | Area only | Area only | ○ | ○ |
| Sum and average measurement | ○ | ○ | ○ | ○ | ○ | ○ |
| Decimal point set-up | * | * | * | ○ | ○ | ○ |
| Auto power off | ○ | ○ | ○ | ○ | ○ | ○ |
| Calculation | * | * | * | * | ○ | ○ |
| Display | dot LCD 8 digits x 1 line | dot LCD 16 digits x 2 lines | dot LCD 17 digits x 3 lines | |||
| Measuring range | 300mm x 300mm | 300mm x 3m | 300mm x 10m | 380mm x 10m | 450mm x 10m | |
| Minimum line reading | ± 0.1cm | ± 0.05mm | ||||
| Accuracy | ± 0.2% | ± 0.1% | ||||
| Auto close function | * | * | * | ○ | ○ | ○ |
| Automatic numbering | * | * | * | * | △ | △ |
| Printer | * | * | * | * | △ | △ |
| RS-232C interface cable | * | * | * | * | △ | △ |
